Publication
Applied Physics Letters
Paper

Effect of F co-implant during annealing of Be-implanted GaAs

View publication

Abstract

F+ co-implantation at different doses and energies was performed into GaAs already implanted with Be+ at high dose (1015 cm-2) and low energy (20 keV), in order to reduce the beryllium diffusion during post-implant annealing. The redistribution behavior of Be and associated electrical effects were studied by secondary-ion mass spectrometry, transmission electron microscopy (TEM), Hall effect measurements, and current-voltage profiling. Be outdiffusion was reduced by co-implantation of F; more than 80% of the implanted Be was retained during rapid thermal annealing up to 850°C. The dose and energy of the F implant strongly influenced Be electrical activation efficiency. High activation, up to 48.5%, was obtained when F was co-implanted at high dose (1015 cm-2) and low energy (10 keV). Hole profiles shown reduced electrical activation in the region where F and Be profiles overlapped and TEM studies indicated the formation of {111} coherent plates, possibly BeF2 precipitates, in the same region. The reduction of Be outdiffusion in F co-implanted samples led to high activation after annealing, and was believed to be due to chemical interaction between Be and F.

Date

Publication

Applied Physics Letters

Authors

Share